TB-200Vinyl injection mortar (anchoring adhesive)
TB-200 Vinyl Injection Reinforcement Adhesive is a two-component, high-strength mixed vinyl resin mortar, which is packed by a two-component cartridge.
Main feature
* High strength, strong adhesive force, good durability, same as embedded.
* No pre-mixing is required, accurate measurement, simple construction, fast and convenient.
* No expansion stress, small edge spacing, will not cause damage to the substrate, and has a reinforcing effect.
* Good heat resistance, anti-aging, good vibration resistance.
* Hard plastic packaging, unused glue can be reused without waste.
Scope of application
* Reinforcement and bolt planting in concrete members
* Curtain wall stone dry hanging bracket fixing
* Building structure reinforcement and frame reinforcement
* Fixation of various equipment foundations
* Anchor connection of steel structure and concrete structure
* Railway, highway, bridge, water conservancy renovation and expansion project reinforcement
* Billboards, tunnel pipelines, elevated road sound insulation boards and guardrails are fixed
TDS
| No. | Test Item | Performance index requirements | Test result | Conclusion | |
| 1 | Splitting tensile strength (MPa) | ≥8.5 | 8.75 | Qualified | |
| 2 | Flexural strength (MPa) | ≥50 | 52 | Qualified | |
| 3 | Compressive strength (MPa) | ≥60 | 71.2 | Qualified | |
| 4 | Standard value of steel to steel tensile shear strength (MPa) | ≥10 | 12.5 | Qualified | |
| 5 | Bonding strength of ribbed steel bar and concrete under constrained drawing | C30Φ25L=150m | ≥12.0MPa | 12.6 | Qualified |
| 6 | C30Φ25L=125m | ≥19.0MPa | 19.2 | Qualified | |
| 6 | Aging resistance to humidity and heat (90D) | Shear strength reduction rate ≤12 | 8.6 | Qualified | |
Curing time
Curing time of TB-200 vinyl injection planting glue
| Substrate temperature(ºC) | -5 | 0 | 10 | 20 | 30 | 40 |
| installation time(min) | 25 | 20 | 10 | 5 | 4 | 3 |
| Curing time(min) | 360 | 180 | 90 | 60 | 40 | 20 |
Construction steps
1. Drilling: drilling according to technical parameters
2. Hole cleaning: use air cylinder or compressed air and brush to clean the drill hole until it is clean
3. Glue injection: install a static mixer on the bottle, use a glue gun to first discharge a small amount of. the incompletely mixed glue at the front end, and then inject glue from the bottom of the hole to the hole, the glue is generally filled with 1 / 2 to 2/3
4. Anchoring: screw the steel bar or screw into the hole slowly, and do not disturb during the curing time
5. Hardening and curing: According to the temperature of the substrate, wait for enough time for the. colloid to cure, and the load can be installed after the colloid is completely cured.
Packing
360ml / pc, 30 pcs / carton
Storage and transportation tips
Storage period: In a dry and cool environment (ambient temperature greater than 5 ºC), it should be prevented from freezing in winter No stacking or rain in the open air. The effective storage period is 12 months when the packaging is intact.
This product is not a flammable, explosive, toxic and dangerous product. It can be transported by general transportation. The packaging must not be damaged during the transportation, exposed to sunlight or rain, and must not be tilted or inverted.
FAQ
Q: If the products not included in the Web and catalog, Can we get them from you ?
A: The products on the Web and in the catalog are part of our hot sale products, for further details of our products series, you are welcome to call us or send us E-mail.
Q: Is it possible to develop new formula at special requirement?
A: Yes, we have professional R&D team for any special requirement on the product. We offer ODM service for customers.
Q: Could you provide OEM service?
A: Yes, OEM service is available. You can contact us by e-mail, tel, skype, whatsapp, facebook etc.
Q: Could you provide a complete solution for the products which are in selling?
A: As a professional manufacturer of sealants for bonding and sealing, it is our pleasure to make customized solution on your requirement on your product.
Q: What is the delivery time for sample and purchased order?
A: At normal condition, the delivery time is 2-10 days for samples, 15-20 days for purchase order.
Q: Can we get a sample ?
A: Yes, we understand that you need sample for testing. So we can provide 1-2 units free of charge.
Q: What's the commonly used transportation ?
A: Our products are non-dangerous material, transportation as normal chemicals, it is safe to ship by air, by sea and by land. How to deliver is up to your requirement and convenience.
Q: How to get your after-sale technical support and service ?
A: If you have any question or suggestion on our products and service, you are welcome to call us or email us. We will serve you whole heartedly. Hot line is +86 1321 0083 810, or your direct customer service.
Q: Can we be your sell agent in my local market ?
A: Yes, you can, but you must discuss the details with us, then sigh agreement. We will help you to win your local market.